100% Pass Guaranteed Accurate NSE6_WCS-7.0 Answers 365 Days Free Updates

NSE6_WCS-7.0 DUMPS Q&As with Explanations Verified & Correct Answers

Fortinet NSE6_WCS-7.0 is a valuable certification for cloud security professionals as it validates their skills and knowledge in cloud security for AWS. Fortinet NSE 6 - Cloud Security 7.0 for AWS certification can help candidates gain recognition in the industry and increase their earning potential. It can also help them advance their careers in cloud security and open up new job opportunities.

Fortinet NSE6_WCS-7.0 is an important certification exam for IT professionals who want to specialize in cloud security for AWS. NSE6_WCS-7.0 exam is designed to test the knowledge and skills of candidates in various areas of cloud security, including designing, implementing, and managing security solutions for AWS cloud deployments.

The Fortinet NSE6_WCS-7.0 exam covers a wide range of topics, including AWS security best practices, network security, web application security, data protection, and compliance. Candidates will also be tested on their ability to configure and deploy Fortinet's cloud security solutions on AWS, such as FortiGate, FortiWeb, FortiManager, and FortiAnalyzer.

 

NEW QUESTION # 16
An administrator has been asked to deploy an active-passive (A-P) FortiGate cluster in the AWS cloud across two availability zones.
In addition to enhanced redundancy, which other major difference is there compared to deploying A-P high availability in the same availability zone?

• A. The FortiGate devices act as a single, logical instance.
• B. Secondary IP address configuration is used.
• C. The number of subnets required is less.
• D. IP addressing and subnetting are not shared.

Answer: D

Explanation:
* Enhanced Redundancy:
* Deploying an active-passive (A-P) FortiGate cluster across two availability zones (AZs) provides enhanced redundancy by ensuring that if one AZ fails, the other can take over, maintaining high availability and uptime.
* IP Addressing and Subnetting:
* One of the major differences when deploying across different AZs compared to the same AZ is that IP addressing and subnetting are not shared between the instances. Each AZ operates independently with its own set of subnets and IP addresses, which must be managed separately (Option D).
* Other Options Analysis:
* Option A is incorrect because the FortiGate devices in an A-P setup do not act as a single logical instance; they operate in a failover setup.
* Option B is incorrect because secondary IP address configuration is used in both single AZ and multi-AZ deployments.
* Option C is incorrect because the number of subnets required is typically more when deploying across multiple AZs for redundancy.
References:
* FortiGate HA Configuration Guide: FortiGate HA
* AWS Availability Zones: AWS AZ

NEW QUESTION # 17
A customer needs a recursive DNS for AWS VPC and on-premises networks. The customer also wants to create conditional forwarding rules and DNS endpoints to resolve custom names in AWS private hosted zones and on-premises DNS servers.
Which Amazon service can be used to achieve this scenario?

• A. Amazon route 53
• B. AWS Lambda service
• C. AWS mapping service
• D. AWS DynamoOB service

Answer: A

NEW QUESTION # 18
An administrator has deployed an environment in AWS and is now trying to send outbound traffic from the web servers to the internet through FortiGate. The FortiGate policies are configured to allow all outbound traffic. however. the traffic is not reaching the FortiGate internal interface.
Which two statements Can be the reasons for this behavior? (Choose two)

• A. AWS security groups are blocking the traffic.
• B. FortiGate is not configured as a default gateway tor web servers.
• C. AWS source destination checks are enabled on the FortiGate internal interfaces.
• D. Internet Gateway (IGW) is not configured for VPC.

Answer: A,C

NEW QUESTION # 19
Which AWS product integrates With FortiGate to automate security remediation for workloads running on the AWS platform?

• A. AWS Protector
• B. AWS Shield
• C. AWS Inspector
• D. AWS GuardDuty

Answer: D

NEW QUESTION # 20
Which three statements are correct about Amazon Web Services networking? (Choose three.)

• A. You cannot deploy FortiGate in transparent mode in AWS.
• B. You cannot use custom frames in AWS
• C. You can configure instant IP failover in AWS.
• D. You cannot configure gratuitous ARP but you can configure proxy ARP.
• E. You can use unicast the FGCP protocol

Answer: A,B,E

NEW QUESTION # 21
An MSSP deployed 16 FortiGate VMS With the default AWS security groups and network access lists using an on-demand license from Amazon Web Services (AWS) Marketplace. They are using a third- party configuration backup application to back up and track changes for the FortiGate configurations. It can connect to the FortiGatedevices using only the SSH protocol, A customer is using the correct username and password configured on the FortiGate devices. but they are unable to log in using the SSH protocol.
What can be the reason Why this authentication is failing?

• A. The AWS key is required to log in to FortiGate using SSH
• B. The default AWS network access list for FortiGate does not allow SSH.
• C. The default AWS Security group for FortiGate does not allow SSH.
• D. AWS uses non-standard SSH port1025, and the default AWS security groups and NACL for FortiGate are not configured for the port.

Answer: A

NEW QUESTION # 22
Which two statements are correct about AWS Network Access Control Lists (NACLS)? (Choose two.)

• A. An NACL has separate inbound and outbound rules, and each rule can either allow or deny traffic.
• B. VPC automatically comes with a modifiable default NACL, and by default it denies all inbound and outbound IPv4 traffic.
• C. By default. each custom NACL allows all inbound and outbound traffic unless you add new rules,
• D. NACLs are stateless: responses to allowed inbound traffic are subject to the rules for outbound traffic.

Answer: A,D

NEW QUESTION # 23
Refer to the exhibit.

You deployed an active-passive FortiGate HA using a Cloud Formation template on an existing VPC_Now you want to test active-passive FortiGate HA failover by running a debug so you can see the API calls to change the elastic and secondary IP addresses.
Which statement is correct about the output of the debug?

• A. The routing table for Fgt2 updated successfully. and port2 will provide internet access to Fgt2.
• B. The elastic IP is associated with port1of Fgt2.
• C. The elastic IP is associated with port2 of Fgt2. and the secondary IP address for port1and port2 was updated successfully.
• D. IP address 10. O. O. L 3 is now associated with eni-Ob61d8afcOaefb8a2.

Answer: D

NEW QUESTION # 24
An organization has created a VPC with two subnets and deployed a FortiGate-VM (VM04/c4.xlarge) in AWS.
The EC2 instance is initially configured with two Elastic Network Interfaces (ENIs). The primary ENI is configured on the public subnet, and the secondary ENI is configured on the private subnet. To provide internet access for the FortiGate-VM, they now want to associate an EIP to its primary ENI, but the assignment is failing.
Which action would allow the EIP assignment to be successful?

• A. Create and associate a public subnet with the primary ENI of the FortiGate VM, and then assign the EIP to the primary ENI.
• B. Create and attach an internet gateway to the VPC, and then assign the EIP to the primary ENI of the FortiGate VM.
• C. Create and attach a public routing table to the public subnet, associate the public subnet with the primary ENI of the FortiGate VM, and then assign the EIP to the primary ENI.
• D. Shut down the FortiGate VM, if it is running, assign the EIP to the primary ENI, and then power it on.

Answer: B

Explanation:
* Internet Gateway Requirement:
* For an Elastic IP (EIP) to be assigned to an instance's primary ENI, the VPC must have an Internet Gateway (IGW) attached. The IGW enables the VPC to communicate with the internet, allowing the EIP to function properly (Option C).
* Process of Assigning EIP:
* Once the Internet Gateway is attached to the VPC, the EIP can be successfully assigned to the primary ENI of the FortiGate VM, providing it with internet access.
* Other Options Analysis:
* Option A is incorrect because the primary ENI is already in a public subnet.
* Option B is not necessary and may not solve the issue without an attached Internet Gateway.
* Option D is partially correct about the routing table but does not address the primary issue of needing an Internet Gateway.
References:
* AWS Elastic IP Documentation: Elastic IP
* AWS Internet Gateway: Internet Gateway

NEW QUESTION # 25
Which product you Can use as AWS WAF web access control lists (web ACLS) to minimize the effects Of a DDOS attack?

• A. AWS Protector
• B. AWS Shield
• C. AWS GuardDuty
• D. AWS Inspector

Answer: B

NEW QUESTION # 26
Refer to the exhibit.

Which statement is correct about the VPC peering connections shown in the exhibit?

• A. You cannot create a separate VPC peering connection between VPC B and VPC C to route packets directly.
• B. You cannot route packets directly from VPC B to VPC C through VPC A.
• C. You can associate VPC ID pcx-23232323 with VPC B to form a VPC peering connection between VPC B and VPC C.
• D. To route packets directly from VPC B to VPC C through VPC A, you must add a route for network
  192.168.0.0/16 in the VPC A routing table.

Answer: B

Explanation:
* Understanding VPC Peering:
* VPC peering connections allow instances in one VPC to communicate with instances in another VPC. Peering is a one-to-one relationship between two VPCs.
* Transit Routing Limitation:
* AWS VPC peering connections do not support transitive peering. This means that a packet originating in VPC B cannot be routed through VPC A to reach VPC C. Each pair of VPCs must have its own peering connection.
* Routing Table Configuration:
* Even if you add a route in the VPC A routing table for the 192.168.0.0/16 network, it won't allow VPC B to communicate with VPC C because of the non-transitive nature of VPC peering.
* Comparison with Other Options:
* Option A is incorrect because adding a route in VPC A does not overcome the limitation of non- transitive peering.
* Option C is incorrect because associating pcx-23232323 with VPC B is not how VPC peering works.
* Option D is incorrect because you can create a separate peering connection between VPC B and VPC C, which is the required approach for communication between these VPCs.
References:
* AWS VPC Peering Guide: VPC Peering
* Limitations of VPC Peering: AWS VPC Peering Limitations

NEW QUESTION # 27
A customer has deployed FortiGate Cloud-Native Firewall (CNF).
Which two statements are correct about policy sets? (Choose two.)

• A. The policy set must be manually synchronized to the CNF instance each time it is modified.
• B. A new policy set is created with each deployed CNF instance.
• C. There is an implicit deny rule at the bottom of the policy set.
• D. Multiple policy sets can be applied to a single CNF instance.

Answer: B,C

Explanation:
* Implicit Deny Rule:
* Similar to traditional firewall rule sets, FortiGate Cloud-Native Firewall (CNF) includes an implicit deny rule at the bottom of each policy set. This means any traffic that does not match an existing rule in the policy set is automatically denied (Option A).
* Policy Set Creation:
* When a new CNF instance is deployed, a new policy set is created specifically for that instance.
This ensures that each CNF instance can have a tailored set of security policies based on the specific needs of the deployment (Option C).
* Other Options Analysis:
* Option B is incorrect because policy sets do not require manual synchronization; they are applied automatically once configured.
* Option D is incorrect as a single CNF instance operates with a single policy set at a time.
References:
* FortiGate CNF Documentation: FortiGate CNF
* Firewall Policy Best Practices: Fortinet Policies

NEW QUESTION # 28
An administrator must deploy a web application firewall (WAF) solution to protect the web applications of their organization.
Why would the administrator choose FortiWeb Cloud over AWS WAF with Fortinet managed rules?

• A. SSL inspection is a requirement.
• B. Traffic must be inspected for malware.
• C. WAF signatures must be manually updated by FortiGuard.
• D. The solution must meet PCI 6.6 compliance.

Answer: A

Explanation:
* SSL Inspection Requirement:
* FortiWeb Cloud provides comprehensive SSL inspection capabilities, allowing it to decrypt and inspect HTTPS traffic for threats. This is a crucial feature for many organizations that need to ensure all traffic, including encrypted traffic, is thoroughly inspected (Option C).
* Comparison with AWS WAF:
* While AWS WAF with Fortinet managed rules provides robust protection, it might not offer the same level of SSL inspection capabilities as FortiWeb Cloud.
* Other Considerations:
* Option A (Manual WAF signature updates) is incorrect because FortiWeb Cloud updates signatures automatically.
* Option B (PCI 6.6 compliance) is a general requirement for any WAF solution, not specific to choosing FortiWeb Cloud over AWS WAF.
* Option D (Traffic inspection for malware) is a feature provided by both FortiWeb Cloud and AWS WAF with Fortinet managed rules.
References:
* FortiWeb Cloud Overview: FortiWeb Cloud
* AWS WAF Documentation: AWS WAF

NEW QUESTION # 29
Your organization is deciding between deploying an active-active (A-A) or active-passive (A-P) FortiGate high availability (HA) cluster in AWS cloud.
Which two statements are true about A-A clusters compared to A-P clusters? (Choose two.)

• A. For A-A clusters, FortiGate must perform SNAT inbound to ensure symmetric traffic flow.
• B. A-A clusters can use a software-defined network (SDN) to perform a failover.
• C. A-A clusters rely on API calls for sfailovers.
• D. A-A clusters always require a load balancer.

Answer: A,D

Explanation:
* Symmetric Traffic Flow with SNAT:
* In active-active (A-A) clusters, symmetric traffic flow is essential for maintaining session integrity across multiple instances. Source Network Address Translation (SNAT) is performed inbound to ensure that return traffic is routed correctly (Option A).
* Load Balancer Requirement:
* A-A clusters require a load balancer to distribute incoming traffic evenly across the active instances. This is crucial for balancing the load and providing high availability (Option C).
* API Calls and Failovers:
* Option B is incorrect because failovers in A-A clusters do not typically rely on API calls but are managed by the load balancer and the clustering mechanism itself.
* Software-Defined Network (SDN) Failover:
* Option D is incorrect as SDN is not specifically required for performing failovers in A-A clusters.
The failover mechanism is typically managed by the load balancer and FortiGate's clustering technology.
References:
* FortiGate High Availability on AWS: FortiGate HA
* AWS Elastic Load Balancing: AWS ELB

NEW QUESTION # 30
Which statement is true about an Elastic Network Interface (ENI)?

• A. Once ENI detaches from one instance. it cannot reattach to another instance.
• B. You can detach primary ENI from an AWS instance.
• C. When youmove an ENI, network traffic is not redirected to the new instance.
• D. An ENI cannot move between AZs.

Answer: D

NEW QUESTION # 31
Refer to the exhibit.

An administrator configured two auto-scaling polices that they now want to test.
What Will be the impact on payg-auto-scaling-group for the FortiGate devices if the administrator executes a scale-in policy?

• A. The scale-in policy will decrease the desired capacity from two to one
• B. The scale-in policy will decrease instances from two to one.
• C. The scale-in policy will decrease the number of maximum instances from four to three.

Answer: C

NEW QUESTION # 32
As part of the security plan you have been tasked with deploying a FortiGate in AWS.
Which two are the security responsibility of the customer in a cloud environment? (Choose two.)

• A. Virtualization platform
• B. Traffic encryption
• C. User management
• D. Storage infrastructure

Answer: B,C

NEW QUESTION # 33
What is a drawback of deploying a FortiWeb VM inside a virtual public cloud (VPC) compared to FortiWeb Cloud?

• A. It is unable to support web applications from OWASP Top 10 threats.
• B. It is slower than FortiWeb Cloud to apply advanced WAF protection.
• C. Only applications going through the VPC are protected.
• D. It does not support zero-day protection.

Answer: C

Explanation:
* VPC-Scoped Protection:
* When deploying a FortiWeb VM inside a Virtual Private Cloud (VPC), the security and protection it offers are limited to the applications and traffic that pass through that specific VPC.
This means that any applications outside this VPC will not benefit from the protection of FortiWeb VM (Option D).
* Comparison with FortiWeb Cloud:
* FortiWeb Cloud, being a cloud-native WAF-as-a-Service, can protect applications regardless of their VPC location, offering broader and more flexible protection capabilities.
* Other Options Analysis:
* Option A is incorrect because both FortiWeb VM and FortiWeb Cloud protect against OWASP Top 10 threats.
* Option B is incorrect because FortiWeb VM does support zero-day protection.
* Option C is incorrect as the performance of FortiWeb VM in applying advanced WAF protection is not inherently slower compared to FortiWeb Cloud.
References:
* FortiWeb Overview: FortiWeb

NEW QUESTION # 34
Refer to the exhibit.

You deployed an active-passive FortiGate HA cluster using a CloudFormation template on an existing VPC.
Now you want to test active-passive FortiGate HA failover by running a debug so you can see the API calls to change the Elastic and secondary IP addresses.
Which statement is correct about the output of the debug?

• A. IP address 10.0.0.13 is now associated with eni-0b61d8afc0aefb8a2.
• B. The Elastic IP is associated with port2 of Fgt2, and the secondary IP address for port1 and port2 was updated successfully.
• C. The routing table for Fgt2 updated successfully, and port2 will provide internet access to Fgt2.
• D. The Elastic IP is associated with port1 of Fgt2.

Answer: D

Explanation:
* HA Event and Failover:
* The debug output indicates that a failover event occurred and the secondary instance (Fgt2) is now taking over as the master.
* Elastic IP Association:
* The debug output shows the process of moving the Elastic IP (eipalloc-090425f83f912c8d6) to the new master instance. This involves associating the Elastic IP with the appropriate network interface (eni) of the new master.
* Specific IP Address Association:
* The Elastic IP is specifically associated with port1 of Fgt2. The message "associate elastic ip eipalloc-090425f83f912c8d6 to 10.0.0.13 of eni eni-0f6b35f8fccd24eb0" indicates that the Elastic IP is now linked to the primary IP address (10.0.0.13) on port1 of the new master.
* Other Options Analysis:
* Option A is incorrect because the routing table update details are not explicitly stated.
* Option C is incorrect because the IP address association mentioned relates to an Elastic IP, not eni-0b61d8afc0aefb8a2.
* Option D is incorrect because it specifically mentions port2 for the Elastic IP association, which is not indicated in the debug output.
References:
* FortiGate HA Configuration Guide: FortiGate HA
* AWS Elastic IP Documentation: Elastic IP

NEW QUESTION # 35
Your company deployed a FortiSandb0X for AWS.
Which statement is correct about FortiSandbox for AWS?

• A. FortiSandbox for AWS does not need more resources because it performs only management and analysis tasks.
• B. FortiSandbox deploys new EC2 instances with the custom Windows and Linux VMS, then it sends malware, runs it, and captures the results for analysis.
• C. FortiSandbox for AWS comes as hybrid solution. The FortiSandb0X manager is installed on-premises and analyzes the results Of the sandboxing process received from AWS EC2 instances
• D. The FortiSandbox manager is installed on AWS platform and analyzes the results of the sandboxing process received from on-premises Windows instances.

Answer: A

NEW QUESTION # 36
Refer to the exhibit.

You have created an autoscale configuration using a FortiGate HA Cloud Formation template. You want to examine the autoscale FortiOS configuration to confirm that FortiGate autoscale is configured to synchronize primary and secondary devices. On one of the FortiGate devices, you execute the command shown in the exhibit.
Which statement is correct about the output of the command?

• A. The device is the secondary in the HA configuration, and the IP address Of the primary device is
  10.0.0.173.
• B. The device is the primary in the HA configuration. with the IP address 10.0.0.173.
• C. The device is the primary in the HA configuration and the IP address of the secondary device is10.0.0.173.
• D. The device is the secondary in the HA configuration. with the IP address 10.0.0.173.

Answer: A

NEW QUESTION # 37
A global organization with cloud networks deployed in several AWS regions wants to set up next-generation firewall (NGFW) protection using FortiGate Cloud-Native Firewall (CNF).
What are two deployment considerations for the organization? (Choose two.)

• A. More than one AWS account can be associated with a CNF instance.
• B. Only one CNF instance is required to protect all AWS regions.
• C. A CNF instance is required for each AWS region that must be protected.
• D. They must choose AWS Firewall Manager to provision a CNF instance.

Answer: A,C

Explanation:
* Regional Deployment:
* For a global organization with cloud networks in multiple AWS regions, a separate FortiGate Cloud-Native Firewall (CNF) instance is required for each AWS region to provide localized protection and meet compliance requirements. This ensures that each region has its own dedicated NGFW protection tailored to its specific needs (Option B).
* Multi-Account Association:
* FortiGate CNF supports associating multiple AWS accounts with a single CNF instance. This feature is beneficial for organizations that operate in a multi-account setup, allowing centralized management and security policies across different accounts (Option C).
* Other Options Analysis:
* Option A is incorrect because AWS Firewall Manager is a different service and is not required to provision a CNF instance.
* Option D is incorrect because a single CNF instance cannot protect multiple AWS regions due to regional isolation in AWS.
References:
* FortiGate CNF Documentation: FortiGate CNF
* AWS Multi-Account Best Practices: AWS Multi-Account

NEW QUESTION # 38
Your customers have been reporting slow response times when accessing your web application.
What are two possible ways to increase response times from web servers protected by FortiWeb Cloud?
(Choose two.)
Your customers have been reporting slow response times when accessing your web application.
What are two possible ways to increase response times from web servers protected by FortiWeb Cloud?
(Choose two.)

• A. Enable a content delivery network
• B. Modify DNS entries to directly point to your web server.
• C. Disable WAF functionality.
• D. Deploy FortiWeb Cloud in the same region where your web application is being hosted.

Answer: A,D

Explanation:
* Same Region Deployment:
* Deploying FortiWeb Cloud in the same AWS region as your web application minimizes latency and ensures faster response times by reducing the distance data needs to travel (Option A).
* Content Delivery Network (CDN):
* Enabling a CDN can significantly improve response times by caching content closer to the end- users, reducing the load on the origin server, and speeding up content delivery (Option B).
* Other Options Analysis:
* Option C is incorrect because modifying DNS entries to directly point to your web server bypasses the WAF protection, which is not advisable for security reasons.
* Option D is incorrect because disabling WAF functionality would expose your web application to vulnerabilities and threats, compromising security.
References:
* AWS Regions and Availability Zones: AWS Regions
* Content Delivery Network Overview: AWS CloudFront

NEW QUESTION # 39
An administrator is adding a web application to be protected by FortiWeb Cloud.
Which two steps are necessary to successfully onboard the application? (Choose two.) An administrator is adding a web application to be protected by FortiWeb Cloud.
Which two steps are necessary to successfully onboard the application? (Choose two.)

• A. Enable a content delivery network (CDN) in the same region where your application is located.
• B. Create DNS records in the domain server that hosts the application.
• C. Provide a web application name.
• D. Wait for the EC2 instance to be created.

Answer: B,C

Explanation:
* Web Application Name:
* When onboarding a web application to be protected by FortiWeb Cloud, you need to provide a name for the web application. This helps in identifying and managing the application within the FortiWeb Cloud console (Option B).
* DNS Records:
* To ensure that traffic to your web application is correctly routed through FortiWeb Cloud, you must create DNS records in the domain server that hosts your application. This ensures that requests are directed to FortiWeb Cloud for inspection and protection (Option C).
* Other Considerations:
* Option A (Waiting for the EC2 instance) is incorrect as it is not a necessary step for onboarding a web application to FortiWeb Cloud.
* Option D (Enabling a CDN) is not a mandatory step for onboarding but can be part of a broader strategy for improving performance and protection.
References:
* FortiWeb Cloud Documentation: FortiWeb Cloud

NEW QUESTION # 40
......

NSE6_WCS-7.0 dumps Exam Material with 37 Questions: https://passguide.braindumpsit.com/NSE6_WCS-7.0-latest-dumps.html