[Dec 27, 2021] 1Z0-1045-20 Exam Brain Dumps - Study Notes and Theory
Pass Oracle 1Z0-1045-20 Test Practice Test Questions Exam Dumps
Oracle 1Z0-1045-20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 21
Your client wants to create an Advanced Shipment Notification (ASN) automatically after a Purchase Order (PO) is created in the system.
What step should they perform?
- A. When interfacing the PO, the "create_asn" check box needs to be selected every time
- B. When interfacing the shipment, the PO number should be specified
- C. Update the Company Parameter CREATE_ASN_FOR_EACH_PO to Yes on the Company Parameter UI screen
- D. The user needs to go to the Purchase Order Screen UI and select the "Create IB Shipment" check box
Answer: C
NEW QUESTION 22
Which statement is true regarding Replenishment Rules?
- A. Replenishment Rules created at Parent company view can be edited at Child company view.
- B. Replenishment Rules are used for defining Wave Template.
- C. Replenishment Rules are used for Inventory movement between two warehouses.
- D. Replenishment Rules are only editable at the company level in which it was created.
Answer: B
NEW QUESTION 23
Your warehouse is divided into two large areas, Area A and Area B, which store different products. You have set up your wave to allocate inventory from only Area A, but when the wave is run, both Area A and area B have allocated items.
What caused the issue?
- A. The locations in Area A have excessive cycle count tasks against them.
- B. Allocation zone was not specified in the task selection criteria.
- C. Allocation zone was not specified in the shipping order.
- D. In the Allocation Mode, "Restrict Allocation Zone" was not specified.
- E. In the Allocation Mode, "Restrict Allocation Zone" was set to Area B.
Answer: B
NEW QUESTION 24
Which Inventory screen should you use to configure the Inventory Adjustment Code in Oracle WMS Cloud?
- A. Reason Codes
- B. IB LPNs
- C. Inventory Lock Codes
- D. Items
Answer: A
NEW QUESTION 25
A user is using the PackNC transaction to pack into a blind OBLPN. The user needs to pick up 10 units for Item 000234, but after picking up four units the OBLPN is full.
What should the user do?
- A. scan the next order
- B. move to the next location
- C. end the LPN
- D. short the remaining units
Answer: C
NEW QUESTION 26
Identify the export type that is not supported in an Express Report.
- A. RTF
- B. PDF
- C. CSV
- D. Excel
- E. PowerPoint
Answer: E
NEW QUESTION 27
Which two options are true if inventory is unallocated and unavailable? (Choose two.)
- A. Inventory in locations with lock codes
- B. Inventory located in a drop zone
- C. Unlocked inventory located in reserve location
- D. Inventory located in active location
Answer: A,C
NEW QUESTION 28
During which of the following three scenarios does the WMS validate or throw an error message during picking with a serial number tracking execution? (Choose three.)
- A. When the scanned serial number is not present in the scanned IB LPN or Outbound LPN or item and is present for a different facility.
- B. When the scanned serial number is present in the scanned IB LPN or active location and also exists for another item in stock in the current facility.
- C. When the same serial number, which is already present on the same Sku in a different facility, is scanned.
- D. When the scanned serial number, which is associated with an OBLPN in shipped status for a different facility, is not found for the current facility.
- E. When the scanned serial number is not present in the scanned IB LPN or Outbound LPN or item and is currently linked to another Inventory Record for the facility.
Answer: A,B,C
NEW QUESTION 29
Your customer wants to allocate Default Putaway Type and Drop location for the Blind IB LPNs after Putaway.
Select the three configurations required to complete Putaway process. (Choose three.)
- A. Use Putaway Type defined in Putaway Type UI screen to set PUTAWAY_TYPE Parameter in Facility Parameter UI Screen
- B. Set Putaway Priority and Rules in UI Screen at Facility level.
- C. Set DEFAULT_DROP_LOCN Parameter in Facility Parameter UI screen.
- D. Set DEFAULT_DROP_LOCN Parameter in Company Parameter UI screen.
- E. Use Putaway Type defined in Putaway Type UI screen to set PUTAWAY_TYPE Parameter in Company parameter UI Screen.
- F. Putaway Type should be defined in Putaway Type UI screen at Facility level.
Answer: A,B,E
NEW QUESTION 30
A client can integrate with WMS Cloud by using the input interface.
Which three options can be integrated? (Choose three.)
- A. Orders
- B. Appointments
- C. Loads
- D. Item
Answer: A,C,D
NEW QUESTION 31
Select two configurations required to fulfill a Cross Dock order. (Choose two.)
- A. Wave template should be configured to allocate Cross Dock Order
- B. IB Shipment Type should be defined for Cross Dock ASN
- C. The Replenishment template is required to replenish Cross Dock Order
- D. Module Parameter should be enabled on the RF Receive Screen for receiving Cross Dock ASN
- E. The Cross Dock Outbound Order type should be defined
Answer: B,C
NEW QUESTION 32
You are the inventory control superuser of a warehouse and need to audit all the cycle count activities done by the operators before they are communicated to the host system from WMS Cloud.
You are responsible for the cycle count functionality configuration of the warehouse as well. This warehouse was newly bought by your company.
Your company is a 3PL and this new warehouse will be used for a new client of your company. Which four tasks do you need to complete? (Choose four.)
- A. Create a Cycle Count RF screen with the parameter auto-approve-mode set to off.
- B. Audit the Pending records in the Cycle Count Adjustment screen.
- C. Set the facility parameter INVN_ADJ_APPROVAL_REQUIRED to yes for the new warehouse.
- D. Set the company parameter INVN_ADJ_APPROVAL_REQUIRED to yes for your company.
- E. Set the company parameter INVN_ADJ_APPROVAL_REQUIRED to yes for the company that you are configuring.
- F. Create a Cycle Count RF screen with the parameter auto-approve-mode set to on.
Answer: B,C,D,F
NEW QUESTION 33
You are the Inventory Control Supervisor at your employer's East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control team members inform you of a significant change in the RF Cycle Counting process.
Lost IBLPNs are now updates with a "00" lock code rather than the expected "LL" code.
Which scenario is causing this issue?
- A. Your counterpart at the 3PL's other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.
- B. You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.
- C. One of your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.
- D. An inventory team member in the other facility marked a lost case with "00" lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.
- E. While counting LPNs at a location, one of your team members marked a lost case with the new lock code.
The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost".
Answer: E
NEW QUESTION 34
In WMS Cloud, which two statements are true about WMS BI Cloud? (Choose two.)
- A. WMS BI Cloud is available for use out of the box
- B. Tables in WMS BI Cloud are referred to as categories
- C. WMS BI Cloud allows users to create reports by creating SQL queries
- D. By default, the WMS BI Cloud functionality is disabled
Answer: B,D
NEW QUESTION 35
What is the primary purpose of the Wave Template Search Screen?
- A. to identify all outbound loads that have not completed picking yet
- B. to determine from which part of the warehouse the inventory will be allocated
- C. to determine which available orders will be waved for picking
- D. to determine the locked locations for inventory allocation
- E. to determine how many picking tasks will be waved for picking
Answer: E
NEW QUESTION 36
Select four true statements about System Directed QC. (Choose four.)
- A. The QC process required the use of Purchase Order.
- B. Items are flagged based on the vendor that sent PO and ASN.
- C. For QC to happen, the vendor has to be configured in the system.
- D. Once system directed QC is turned on, all receipts go through QC.
- E. How many SKUs are flagged for QC depends on what is specified in the vendor QC Screen.
Answer: A,C,D,E
NEW QUESTION 37
......
Verified 1Z0-1045-20 dumps Q&As - 1Z0-1045-20 dumps with Correct Answers: https://passguide.braindumpsit.com/1Z0-1045-20-latest-dumps.html