Real HP HPE6-A75 Exam Questions [Updated 2023]

HPE6-A75 Exam Dumps Pass with Updated 2023 Aruba Certified Edge Professional Exam

HP HPE6-A75 exam is designed to evaluate the skills and knowledge of IT professionals in the field of wireless networking. HPE6-A75 exam focuses on the Aruba Certified Edge Professional (ACEP) certification, which is a highly sought-after certification for individuals who specialize in designing and implementing wireless networks.

 

NEW QUESTION # 19
OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system. The administrator also needs the router ID to De stable and available, even if some links on the switch fail.
What should the administrator do?

• A. Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest ID.
• B. Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface.
• C. Configure 10.0.0.1 as a secondary IP address on the switch 00BM poet.
• D. Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system.

Answer: B

NEW QUESTION # 20
Refer to the exhibit.

Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

• A. Full Access VLAN
• B. Internet VLAN
• C. Deny Access
• D. Employee VLAN

Answer: D

NEW QUESTION # 21
What must an OSPF router do when it receives a link state update?

• A. It must re-establish adjacency with its Designated Router and Backup DR.
• B. It must run the shortest path first algorithm.
• C. It must initiate a graceful restart timer.
• D. It must participate in a new election for the Designated Router and Backup DR.

Answer: B

NEW QUESTION # 22
An AOS-Switch needs to implement tunneled node in role-based mode. Aruba ClearPass is configured to assign users for which the traffic should be tunneled to a role named tunnel. The Aruba Mobility Controller should apply policies associated with the employees group to these users.
What is the correct user role configuration on the AOS-Switch for this scenario?

• A. one user role named employees with tunnel set as the secondary role in the tunneled-node- command redirect
• B. one user role named tunnel with employees set as the secondary role in the tunneled-node- command redirect
• C. two user roles, one named tunnel that uses the tunneled-node-redirect command, and one named employees
• D. two user roles, one named employees that uses the tunneled-node-redirect command, and one named tunnel

Answer: A

NEW QUESTION # 23
Refer to the exhibit.


Traffic between the servers m Area l takes a less optimal path rather than the link associated with VLAN l OOO, subnet 10.0.0.0/30. Based on the exhibits, why is this the case?

• A. Switch-1 and Switch-2 cannot achieve adjacency on VLAN 1000 due to mismatches.
• B. The link between Switch-1 and Switch-2 has gone down.
• C. OSPF routing switches choose the best intra-area routes based on Area 1 links only.
• D. The metric on the VLAN 1000 interface is too low.

Answer: C

NEW QUESTION # 24
Refer to the exhibit.

A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch. The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit. Which issue could cause this output?

• A. The administrator entered the wrong password for the test account.
• B. The RADIUS shared secret does not match on the switch and the server.
• C. The switch port is set for user mode 801. IX. but the RADIUS server is set for port mode.
• D. The switch does not have a certificate tor port-access installed on the switch.

Answer: B

NEW QUESTION # 25
Refer to the exhibit.

An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?

• A. Onboard Pre-Provisioning - Aruba
• B. Onboard Post-Provisioning - Aruba
• C. Deny Access Profile
• D. Onboard Device Repository

Answer: A

NEW QUESTION # 26
When is it necessary to use an SNMP based Enforcement profile to send a VIAN?

• A. When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.
• B. When we have to assign a VLAN to a wired user on a third party wired switch that doesn't support RADIUS authentication.
• C. When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.
• D. When we have to assign a vlan to a wired user on a third party wired switch that doesn't support RADIUS return attributes.
• E. When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.

Answer: C

NEW QUESTION # 27
Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).
- Each campus is responsible to purchase its own AP licenses.
- There are 900 AP licenses deployed in the global pool.
- There are three dedicated pools.
- From the global pool, 300 AP licenses are assigned to each dedicated
pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses in CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?

• A. Add 100 more AP licenses to the global pool.
• B. Allow CampusA to share from the CampusC pool.
• C. Move 100 licenses from the CampusC pool to the global pool.
• D. Add 100 more AP licenses and assign them to the CampusA pool.

Answer: D

Explanation:
Each campus is responsive to purchase its own AP licenses.
You could not take licenses from CampusC.

NEW QUESTION # 28
Refer to the exhibit.

• A. We can't know this from the screenshot above.
• B. mike
• C. Employee
• D. john

Answer: A

Explanation:
The role field in the local user repository is not the role derived from role maping.

NEW QUESTION # 29
Refer to the exhibit.

Controllers are configured m a cluster as shown in the exhibit. These are the network details.
- A Mobility Master (MM) manages the cluster.
- The cluster contains two controllers: Cl and C2.
- API and AP2 use C1 as their Active AP Anchor Controller (A-AAC) with
C2 as their Standby AAC (S-AAC).
- AP3 and AP4 use C2 as their A-AAC, with C1 as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A- UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

• A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
• B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
• C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
• D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.

Answer: B

Explanation:
The user VLAN or AP group will not directly affect whether cluster is L2 or L3. Each MC will probe its VLANs and will only choose L3 if the VLAN config is mismatched or the MC itself is in a different VLAN itself. The cluster should be L2 thus the APs will retain A-AAC unless rebalance or failure. The user will do the same for the U-AAC.

NEW QUESTION # 30
A university wants to deploy ClearPass with the Guest module. They have two types of users that need to use web login authentication. The first type of users are students whose accounts are in an Active Directory server. The second type of users are friends of students who need to self-register to access the network.
How should the service be setup in the Policy Manager for this Network?

• A. Guest User Repository as the authentication source, and Guest User Repository and Active Directory server as authorization sources
• B. Guest User Repository and Active Directory server both as authentication sources
• C. Either the Guest User Repository or Active Directory server should be the single authentication source
• D. Guest User Repository as the authentication source and the Active Directory server as the authorization source
• E. Active Directory server as the authentication source, and Guest User Repository as the authorization source

Answer: B

NEW QUESTION # 31
A company has AOS-Switches, Aruba ClearPass, and Aruba Airwave. A network administrator needs to set up a new switch with the same settings found on other switches in the company.
Which action rs likely to be the most useful to perform the task?

• A. View the current running config on each switch.
• B. Use the configuration audit tool on AirWave.
• C. Access the Network Device view on ClearPass.
• D. View usage patterns on the switches on AirWave.

Answer: C

NEW QUESTION # 32
A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2. What is the difference?

• A. A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.
• B. A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.
• C. A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.
• D. A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.

Answer: B

NEW QUESTION # 33
A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches. What should be set up for this purpose?

• A. an SNMP trap
• B. an lP SLA profile
• C. an auto-config server
• D. an RMON alarm

Answer: A

NEW QUESTION # 34
Refer to the exhibit.

A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?

• A. The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.
• B. The standby selects the port on the designated forwarder for the aggregation.
• C. The standby uses its own port in the link aggregation to forward the fabric.
• D. The standby uses the typical load sharing algorithm, and it might select either its port or the commander's port.

Answer: C

NEW QUESTION # 35
An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster. What must the administrator do to solve this problem?

• A. Enable CPSec in the MultiZone profile for both the primary and data zone.
• B. Enable MultiZone booting in the MultiZone AP apboot configuration mode.
• C. Add the MultiZone APs to the data zone's CPSec whitelist.
• D. Use different AP Group names for the two zones.

Answer: D

NEW QUESTION # 36
Refer to the exhibits.


Refer to the exhibits. The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on Al and A2?

• A. Both A1 and A2 forward traffic
• B. A1 blocks traffic, and A2 forwards traffic.
• C. A1 towards traffic, and A2 blocks traffic.
• D. Both Al and A2 block traffic.

Answer: A

NEW QUESTION # 37
Refer to the exhibit.

Based on the configuration for the client's certificate private key as shown, which statements accurately describe the settings? (Select two.)

• A. More bits in the private key will reduce security.
• B. The private key is stored in the ClearPass server.
• C. More bits in the private key will increase security.
• D. The private key for TLS client certificates is not created.
• E. The private key is stored in the user device.

Answer: C,E

NEW QUESTION # 38
The administrator expects the AP to connect to a cluster, but the AP tails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?

• A. The AP is configured as a RAP to terminate on a Mobility Master.
• B. The AP is configured to terminate on a Mobility Controller in a cluster.
• C. The AP is configured to terminate on a non-cluster Mobility Controller.
• D. The AP is configured as a RAP to terminate on a stand-alone controller.

Answer: A

NEW QUESTION # 39
An AOS-Switch has type of service disabled on it globally. The administrator enters:
AOS-Switch(config)# interface 1 qos trust device aruba-ap
What is the effect of this command?

• A. if interface connects to an Aruba AP, the switch marks all traffic received on the interface with a higher than default priority value
• B. if interface 1 connects to an Aruba AP, it uses the incoming DSCP and a global DSCP map to prioritize traffic received on this interface
• C. if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings sent by the controller to classify traffic received on interface 1
• D. if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings send by the controller to prioritize traffic sent on interface 1

Answer: D

NEW QUESTION # 40
Refer to the exhibit.

A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch.
The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit.
Which issue could cause this output?

• A. The administrator entered the wrong password for the test account.
• B. The RADIUS shared secret does not match on the switch and the server.
• C. The switch port is set for user mode 801. IX. but the RADIUS server is set for port mode.
• D. The switch does not have a certificate tor port-access installed on the switch.

Answer: B

NEW QUESTION # 41
Why is a terminate session enforcement profile used during posture checks with 802.1 x authentication?

• A. To force the user to re-authenticate and run through the service flow again
• B. To disconnect the user for 30 seconds when they are in an unhealthy posture state
• C. To remediate the client applications and firewall do that updates can be installed
• D. To send a RADIUS CoA message from the ClearPass server to the client
• E. To blacklist the user when they are in an unhealthy posture state

Answer: D

NEW QUESTION # 42
An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?

• A. Firewall policy
• B. 802.1X policy
• C. User role
• D. AAA policy

Answer: A

NEW QUESTION # 43
......

HPE6-A75 Exam Dumps, HPE6-A75 Practice Test Questions: https://passguide.braindumpsit.com/HPE6-A75-latest-dumps.html