The Most Efficient ZDTE Pdf Dumps For Assured Success [2026]

We offers you the latest free online ZDTE dumps to practice

NEW QUESTION # 23
Which type of sensitive information can be protected using OCR (Optical Character Recognition) technology?

• A. Personally Identifiable Information (PII)
• B. Network configurations
• C. Financial transactions
• D. Software licenses

Answer: A

Explanation:
Zscaler's Data Protection platform integrates Optical Character Recognition (OCR) into its inline Data Loss Prevention (DLP) capabilities. OCR enables Zscaler to extract text embedded within images-such as screenshots, scanned documents, or photos of forms-and subject that text to the same DLP inspection engines that normally analyze plain text content.
Once OCR has converted image content into text, Zscaler can apply predefined dictionaries, custom dictionaries, and advanced classifiers to detect sensitive data types, including personally identifiable information (PII) such as national ID numbers, passport numbers, addresses, or other regulated personal data. This is crucial because many data leaks occur via screenshots or scanned documents that traditional, text- only DLP engines would miss.
While OCR could, in theory, detect patterns related to network configurations, software licenses, or financial transactions, Zscaler's training and exam materials emphasize its use to protect sensitive data in images- especially user-related regulated data such as PII and other compliance-relevant information. Network configurations and software licenses are better addressed through configuration management and IP protection policies, and "financial transactions" describes activities rather than a specific information pattern.
Therefore, Personally Identifiable Information (PII) is the best and most exam-accurate answer for the type of sensitive information protected using OCR.

NEW QUESTION # 24
What is the primary benefit of using a Custom Zscaler Connector for SaaS Application?

• A. Broad access to all SaaS Application Tenants across Microsoft and Google
• B. Temporary user credentials to access the SaaS Application Tenants
• C. Minimum set of required credentials to access the SaaS Application Tenants
• D. Full administrator credentials to access the SaaS Application Tenants

Answer: C

Explanation:
In Zscaler's SaaS Security and Data Protection services, a Custom Zscaler Connector (for example, for Google Workspace, Microsoft 365, or Salesforce) is designed so that Zscaler can connect to a specific SaaS tenant using only the minimum set of required credentials and scopes. The documentation for onboarding custom connectors explicitly emphasizes that, instead of providing full administrator rights, you authorize narrowly scoped API/OAuth permissions that allow Zscaler to scan data at rest and enforce security controls while adhering to least-privilege principles.
This minimal-credential approach reduces risk if the connector credentials are ever compromised, simplifies compliance audits, and aligns with modern security best practices. Zscaler needs just enough access to read, classify, and (where applicable) remediate or quarantine sensitive content in sanctioned SaaS applications, not broad tenant-wide admin access. Options suggesting temporary credentials, broad cross-tenant access, or full administrator rights contradict this design philosophy and the way the connectors are documented. Therefore, the primary benefit-and the key phrase you should associate with Custom Zscaler Connectors for the exam-is that they enable Zscaler to operate using a minimum set of required credentials for each SaaS Application tenant.

NEW QUESTION # 25
What is one of the primary reasons for choosing the right DNS architecture?

• A. To limit the number of DNS queries a user can make
• B. To improve overall performance and responsiveness
• C. To reduce the cost of internet access
• D. To increase the complexity of network configurations

Answer: B

Explanation:
In the Zscaler Digital Transformation Engineer material, DNS is highlighted as a critical dependency in the overall user experience path. When DNS responses are slow or inconsistent, even well-designed network paths and high-bandwidth links still result in poor page load times and sluggish application behavior. The Zscaler help on performance explicitly calls out that delayed DNS responses negatively affect page loading times, underscoring that DNS resolution speed directly impacts perceived performance.
Zscaler's DNS Security and Control and Trusted Resolver capabilities are designed not only to improve security but also to deliver "lightning-fast, secure DNS resolution and high availability" and to "ensure a great user experience with requests resolved at the edge." Choosing the right DNS architecture-where resolvers are close to users, highly available, and integrated with security policy-therefore becomes a primary lever to improve performance and responsiveness for all applications.
Limiting the number of DNS queries, reducing internet cost, or adding configuration complexity are not stated goals of Zscaler's recommended DNS design. Instead, the curriculum consistently frames correct DNS architecture as foundational to fast, reliable name resolution and a smooth digital experience, which aligns directly with option B.

NEW QUESTION # 26
Which set of protocols was developed to provide the most secure passwordless authentication methods, using services such as Windows Hello and YubiKey?

• A. SCIM
• B. OpenID
• C. SAML
• D. Fast Identity Online 2 (FIDO2)

Answer: D

Explanation:
FIDO2 (Fast Identity Online 2) is a family of open authentication standards designed specifically to enable strong, phishing-resistant, passwordless authentication. It combines the WebAuthn standard (for browsers and web applications) with the CTAP protocol (for communicating with authenticators such as security keys).
Vendors like Microsoft explicitly describe Windows Hello and FIDO2 security keys as passwordless sign-in mechanisms, and Yubico likewise highlights FIDO2 support on YubiKey devices for passwordless and multi- factor authentication.
Zscaler's identity-related documentation and partner guides reference FIDO2 and passwordless methods such as Windows Hello for Business and FIDO2-based passkeys as modern options that integrate with identity providers (e.g., Microsoft Entra ID / Azure AD) and can be used for Zscaler authentication flows.
By contrast, SCIM is a provisioning standard for user and group lifecycle management, not an authentication protocol. OpenID (and OpenID Connect) and SAML are federation and SSO protocols that typically still rely on passwords or existing credentials at the identity provider, even though they may be used alongside MFA.
Only FIDO2 is purpose-built for secure, hardware- or device-bound, passwordless authentication with biometrics or secure PINs, which is exactly what the question describes with examples like Windows Hello and YubiKey.

NEW QUESTION # 27
What is the primary benefit of using a subcloud in Zscaler?

• A. To increase the number of available Public Service Edges
• B. To improve the accuracy of geolocation data
• C. To eliminate the need for ZIA Public Service Edges
• D. To guarantee that web traffic is forwarded to preferred ZIA Public Service Edges

Answer: D

Explanation:
A subcloud in Zscaler is defined as a subset of ZIA Public Service Edges (data centers) that you group together and associate with specific locations or traffic. Conceptually, it is a logical "pool" of preferred Public Service Edges. When a user or site is mapped to a given subcloud, their traffic is steered only to that selected subset of Service Edges instead of any available data center in the wider cloud.
The main benefit of this design is control and predictability: you can guarantee that web traffic is forwarded to your preferred ZIA Public Service Edges, which is critical when you must keep egress IPs stable for SaaS allow-lists, regulatory requirements, or local data-residency mandates. Subclouds also help with operational resilience, because you can temporarily exclude problematic data centers from a subcloud without changing overall forwarding methods, ensuring continuity while still using your defined group of Service Edges. They do not increase the number of Service Edges, replace ZIA Public Service Edges, or directly affect IP geolocation precision. Therefore, option C correctly captures the primary benefit expected in the ZDTE/EDU-202 context.

NEW QUESTION # 28
Which authorization framework is used by OneAPI to provide secure access to Zscaler Internet Access (ZIA), Zscaler Private Access (ZPA), and Zscaler Client Connector APIs?

• A. SAML
• B. OAuth 2.0
• C. JSON Web Tokens
• D. API Keys

Answer: B

Explanation:
Zscaler OneAPI provides a unified, programmatic interface to automate configuration and operations across the Zscaler platform, including ZIA, ZPA, and Zscaler Client Connector. Zscaler's OneAPI documentation clearly states that OneAPI uses the OAuth 2.0 authorization framework to secure access to these APIs.
In practice, administrators or automation platforms register an API client in ZIdentity, obtain OAuth 2.0 access tokens, and then use those tokens to call OneAPI endpoints. The use of OAuth 2.0 ensures standardized flows for client authentication, token issuance, and scope-based authorization, aligning with modern security best practices and making it easier to control and audit API access. Zscaler also highlights OAuth 2.0 as one of the three architectural pillars of OneAPI, along with a common endpoint and tight integration with ZIdentity.
While JSON Web Tokens (JWTs) can be used as a token format inside OAuth 2.0, they are not, by themselves, the authorization framework. SAML is typically used for browser-based SSO, not for securing REST APIs in this context. API Keys are simpler credential schemes and are not what Zscaler prescribes for OneAPI. As a result, OAuth 2.0 is the correct and exam-relevant answer.

NEW QUESTION # 29
What type of data would be protected by using Zscaler Indexed Document Matching (IDM)?

• A. High-value documents that tend to carry sensitive data, such as medical forms and tax documents.
• B. Excel sheets and other numerically based document types that usually contain proprietary financial calculations.
• C. Sensitive data found in image files such as JPEGs and PNGs, or images embedded in documents like a Word file.
• D. Specific, sensitive pieces of data such as customer credit card numbers and employee national identity numbers.

Answer: A

Explanation:
Zscaler Indexed Document Matching (IDM) is a DLP technique used to protect entire documents or large portions of text-based content, rather than discrete data fields. Administrators upload representative samples of "crown jewel" documents (for example, contract templates, medical forms, HR records, or tax documents).
Zscaler processes and indexes the textual content, then uses this index to detect when similar or identical document content is uploaded, shared, or exfiltrated through monitored channels.
This approach is ideal for high-value, unstructured documents that contain sensitive information in a repeatable format. It is distinct from Exact Data Match (EDM), which is used for structured field-level data such as credit card numbers or national IDs, and it is not optimized for pure image content or OCR-based detection. While IDM can apply to many file types (Word, PDF, spreadsheets that contain meaningful text, etc.), the core use case is protecting documents where overall content similarity matters.
Therefore, the best description is that IDM protects high-value documents that tend to carry sensitive data, such as medical forms and tax documents.

NEW QUESTION # 30
In an LDAP authentication flow, who requests the user credentials?

• A. NSS Server
• B. SAML Identity Provider
• C. Active Directory
• D. Zscaler

Answer: D

Explanation:
In a Zscaler LDAP authentication flow, the Zscaler service is the component that actually prompts the user for credentials. The user's browser is redirected to a Zscaler-hosted login page where the username and password are entered. Zscaler then acts as the LDAP client: it takes those credentials and performs an LDAP bind against the organization's directory (for example, Microsoft Active Directory) to verify them.
Active Directory (or another LDAP directory) is therefore the authentication authority, but it does not directly "request" credentials from the user; it simply evaluates the bind request received from Zscaler and returns success or failure. The NSS Server is a Nanolog Streaming Service used for log export, and it is not part of the user authentication path. Similarly, a SAML Identity Provider is used for SAML-based SSO flows, not for direct LDAP authentication.
Because Zscaler owns the login page and collects the credentials before passing them securely to the LDAP directory for validation, the correct answer is that Zscaler is the component that requests the user credentials.

NEW QUESTION # 31
The Zscaler for Users - Engineer (EDU-202) learning path consists of various solutions covered in eleven courses. Which of the following topics is out of scope for the Zscaler for Users - Engineer learning path?

• A. Enabling versions to control which version (if any) of Zscaler Client Connector is available when end users manually update the app or when you configure automatic app updates.
• B. Configuration of ZDX for applications, call quality monitoring, probes, diagnostics, alerts, and role- based administration to ensure effective SaaS and web application monitoring.
• C. Exploring Intrusion Prevention System, DNS Control, Tenant Restrictions, and secure application segmentation.
• D. In-depth overview of Zscaler's architecture platform, including its global scale, additional capabilities, and API infrastructure.

Answer: A

Explanation:
Official EDU-202 materials describe the Engineer path as focusing on advanced architecture, connectivity, platform, access control, cyberthreat protection, data protection, risk management, ZDX, and Zero Trust Automation. The published learning outcomes explicitly include: discussing the architecture of the Zscaler platform and its API infrastructure; configuring advanced connectivity options; and configuring advanced cybersecurity services and Zscaler Digital Experience (ZDX)-including application monitoring, call quality, probes, diagnostics, alerts, and role-based administration. These map directly to options A, C, and D, which align to Zscaler Architecture, Cyberthreat/Access Control Services (IPS, DNS Control, Tenant Restrictions, segmentation), and ZDX content in the EDU-202 outline.
By contrast, Client Connector App Store "version enablement" and controlling which build is available when users manually or automatically update the app is documented as an administration task in the Client Connector help and is typically taught in the Essentials/Administrator (EDU-200) path, not in the Engineer path. Those materials show how to use the App Store to enable builds and control available versions, positioning it as operational client management rather than an advanced Engineer-level topic.
Consequently, option B is considered out of scope for EDU-202 in the ZDTE context.
Top of Form

NEW QUESTION # 32
What is the default classification for a newly discovered application in the App Inventory in the Third-Party App Governance Admin Portal?

• A. Reviewing
• B. Sanctioned
• C. Unclassified
• D. Unsanctioned

Answer: C

Explanation:
In Zscaler 3rd-Party App Governance documentation, the App Inventory is where administrators view and manage all discovered third-party apps, add-ons, and extensions. The "Classifying Apps" help article defines the available states: Unclassified, Sanctioned, Reviewing, and Unsanctioned. Crucially, it notes that Unclassified is the default state for any new application before an administrator evaluates it.
"Sanctioned" is used once the organization has explicitly approved an app for use; "Unsanctioned" is used when an app is not allowed; and "Reviewing" indicates it is under investigation. Those labels are the result of governance decisions applied after discovery.
ZDTE study materials on SaaS and app governance mirror this behavior: newly discovered apps enter the inventory without an explicit decision, allowing security teams to triage risk, review permissions, and only then mark them as sanctioned or unsanctioned. Because the default state for a new entry is explicitly documented as Unclassified, the correct answer is D. Unclassified.

NEW QUESTION # 33
The ZDX Dashboard is a comprehensive tool designed to provide a performance overview of an organization's digital experience. It encompasses various aspects to monitor and analyze performance, ensuring a smooth digital experience across the organization.
Which of the following is responsible for the automated root cause analysis within ZDX?

• A. OAuth request
• B. Y-Engine
• C. Copilot
• D. Application Performance

Answer: B

Explanation:
In the Zscaler Digital Experience (ZDX) section of the Digital Transformation Engineer material, Y-Engine is explicitly defined as ZDX's Automated Root Cause Analysis component. The EDU-200 and study-guide content describe Y-Engine as using machine learning to automatically isolate root causes of performance issues, correlating metrics across applications, networks, and devices so that IT teams spend less time troubleshooting and can get users back to work faster.
Several ZDX overviews and integration documents reiterate that Y-Engine is ZDX's AI/ML-based approach to detect what is causing the ZDX score for a given application or user segment to drop, effectively automating the "why is it slow?" analysis that would otherwise require multiple domain-specific tools.
"Copilot" in the Zscaler context refers to generative-AI assistance that can surface insights and answer questions, but it is built on top of underlying telemetry and correlation engines like Y-Engine; it is not the core Auto-RCA engine itself. "Application Performance" is a metric category within ZDX, and "OAuth request" is simply an authentication mechanism, not a diagnostic engine. Accordingly, the training content makes it clear that Y-Engine is responsible for automated root cause analysis, so option C is correct.

NEW QUESTION # 34
How does log streaming work in ZIA?

• A. User access goes through the ZEN (Zscaler Enforcement Node). NSS (Nanolog Streaming Service) opens a secure tunnel to the cloud. ZEN sends the logs to the cloud Nanolog for storage. Cloud Nanolog streams a copy of the log to NSS. NSS sends the log to the SIEM over the network.
• B. NSS opens a secure tunnel to the cloud. Cloud Nanolog streams a copy of the log to NSS. User access goes through the ZEN. ZEN sends the logs to the cloud Nanolog for storage. NSS sends the log to the SIEM over the network.
• C. NSS opens a secure tunnel to the cloud. ZEN sends the logs to the cloud Nanolog for storage. User access goes through the ZEN. Cloud Nanolog streams a copy of the log to NSS. NSS sends the log to the SIEM over the network.
• D. NSS (Nanolog Streaming Service) opens a secure tunnel to the cloud. User access goes through the ZEN (Zscaler Enforcement Node). ZEN sends the logs to the cloud Nanolog for storage. Cloud Nanolog streams a copy of the log to NSS. NSS sends the log to the SIEM over the network.

Answer: A

Explanation:
In ZIA, user traffic is first forwarded to a Zscaler Enforcement Node (ZEN), where security and access policies are enforced and transaction logs are generated. Those logs are then sent from the ZEN to the cloud- based Nanolog cluster, which is the highly scalable logging and storage layer used by Zscaler. Nanolog compresses and stores the logs for reporting, analytics, and long-term retention.
To deliver logs to a customer's SIEM, the Nanolog Streaming Service (NSS) is deployed in the customer environment. NSS establishes a secure, outbound tunnel to the Nanolog service in the Zscaler cloud and subscribes to that customer's log stream. Nanolog then continuously streams a copy of relevant logs over this secure connection to NSS. NSS receives the logs, converts them into the required output format (for example, syslog or CEF), and forwards them on to the configured SIEM or log receiver.
Option C is the only answer that correctly represents the logical sequence: user traffic through ZEN, ZEN to Nanolog, secure tunnel from NSS, Nanolog streaming to NSS, and finally NSS forwarding to the SIEM.

NEW QUESTION # 35
Which connectivity service provides branches, on-premises data centers, and public clouds with fast and reliable internet access while enabling private applications with a direct-to-cloud architecture?

• A. Zscaler Browser Access
• B. Zscaler Zero Trust SD-WAN
• C. Zscaler App Connector
• D. Zscaler Privileged Remote Access

Answer: B

Explanation:
Zscaler Zero Trust SD-WAN is specifically designed to give branches, on-premises data centers, and workloads running in public clouds fast, reliable, and secure access to the internet and private applications using a direct-to-cloud architecture. In the Zscaler Digital Transformation Engineer curriculum, this service is positioned as the connectivity foundation that replaces legacy hub-and-spoke MPLS and VPN designs with cloud-delivered Zero Trust connectivity.
Instead of backhauling traffic to central data centers, branches and sites establish lightweight, policy-driven tunnels directly to the Zscaler cloud, where security inspection and Zero Trust access decisions are applied.
This architecture reduces latency, simplifies routing, and optimizes SaaS and internet performance while simultaneously enabling secure access to private applications without exposing them to the public internet.
App Connectors (option C) are used for application-side connectivity in ZPA, not for full branch or data center connectivity. Browser Access (option B) provides clientless application access for users, not network- level site connectivity. "Zscaler Privileged Remote Access" (option A) is not the term used for this broad connectivity service. Therefore, the only option that matches the described direct-to-cloud, multi-site connectivity role is Zscaler Zero Trust SD-WAN.

NEW QUESTION # 36
Safemarch is a retail company with hundreds of stores across the United States. Their core applications reside in two different data centers with a considerable presence on AWS.
Which would be a good connectivity solution for them to access applications from store locations?

• A. Site-to-site VPNs from stores to Zscaler Edge, with App Connectors on-prem and on AWS.
• B. Branch Connector at stores for Zscaler connectivity and Direct Connect from data centers to AWS.
• C. SD-WAN connectivity to stores and Zscaler Edge, with App Connectors on-prem and on AWS.
• D. Branch Connectors at stores with App Connectors on-prem and on AWS.

Answer: C

Explanation:
For a large retail organization with hundreds of geographically distributed stores and applications split across multiple data centers plus AWS, Zscaler reference designs emphasize an SD-WAN-to-Zscaler Edge model combined with ZPA App Connectors deployed close to the applications. In this model, each store uses SD- WAN to build resilient, policy-based connectivity to the nearest Zscaler Edge locations. Those edges then provide secure, optimized access to private applications published through App Connectors installed in the on- premises data centers and within AWS VPCs.
This approach centralizes security and access control in the Zscaler cloud while avoiding the operational burden of managing hundreds of direct site-to-site VPNs. It also aligns with Zero Trust principles by steering all store traffic to Zscaler rather than extending the corporate network to every store. Direct Connect between data centers and AWS (as in option A) is optional from a ZPA perspective because App Connectors in AWS communicate outbound to Zscaler over the internet. Branch Connector (option D) is typically used when SD- WAN or suitable edge devices are not present, whereas a large retail environment commonly standardizes on SD-WAN.

NEW QUESTION # 37
An IT administrator is reviewing the recently configured ZDX module in their environment and checks the performance data on the dashboard. The administrator notices that no software inventory has populated. What could be a probable reason?

• A. ZDX license doesn't have inventory collection entitlement
• B. ZDX client is not configured to collect inventory data
• C. Zscaler Client Connector needs to be whitelisted on the EDR tool
• D. ZDX client version being used is 4.3

Answer: B

Explanation:
Zscaler Digital Experience (ZDX) relies on Zscaler Client Connector to collect device and application telemetry from endpoints. Performance metrics (such as device, network, and application scores) are enabled as part of the core ZDX deployment, which explains why the administrator can already see performance data on the dashboard. However, software inventory is an additional inventory feature that must be explicitly enabled in the ZDX administration settings.
ZDX documentation describes an "Inventory Settings" page where administrators must turn on a setting such as "Collect Software Inventory Data." When this option is enabled and the minimum supported versions of Client Connector and the ZDX module are present, Client Connector begins collecting installed software details and sending this inventory to the ZDX cloud for visualization.
If the collection toggle is left disabled, ZDX will continue to show performance metrics but no entries appear under Software Inventory or related views, even though licensing and versions are otherwise correct. The other options listed either relate to licensing, generic EDR conflicts, or a specific client version and do not match the documented dependency on enabling software-inventory collection. Therefore, the most accurate reason is that the ZDX client (via policy) is not configured to collect inventory data.

NEW QUESTION # 38
At which level of the Zscaler Architecture do the Zscaler APIs sit?

• A. Enforcement Plane
• B. Data Fabric
• C. Central Authority
• D. Nanolog Cluster

Answer: C

Explanation:
Zscaler's core architecture in the Engineer course is explained using three main layers: Central Authority, Enforcement Nodes, and Logging / Nanolog services, supported by a distributed data fabric. The Central Authority is explicitly described as the "brains" or control plane of the Zscaler platform. It is responsible for global policy management, configuration, orchestration, and the API gateway that exposes Zscaler's administrative and automation APIs.
Enforcement nodes (such as ZIA Public Service Edges and ZPA enforcement components) form the data plane, inspecting traffic and applying policy decisions but not hosting the management APIs themselves.
Nanolog clusters handle large-scale log storage and streaming, providing logging and analytics rather than control or configuration interfaces. The data fabric underpins global state and synchronization across the cloud but is not where customers interact with APIs.
In the Digital Transformation Engineer material, when you see references to OneAPI and other programmatic integrations, they are always associated with the Central Authority layer, reinforcing that APIs live in the control plane. Therefore, within the defined Zscaler Architecture levels, the APIs sit at the Central Authority.

NEW QUESTION # 39
A customer requires 2 Gbps of throughput through the GRE tunnels to Zscaler. Which is the ideal architecture?

• A. Two primary and two backup GRE tunnels from internal routers with NAT enabled
• B. Two primary and two backup GRE tunnels from border routers with NAT enabled
• C. Two primary and two backup GRE tunnels from internal routers with NAT disabled
• D. Two primary and two backup GRE tunnels from border routers with NAT disabled

Answer: D

Explanation:
Zscaler design guidance for GRE connectivity emphasizes three key principles: terminate GRE on border (edge) devices, avoid NAT on GRE source addresses, and scale bandwidth by using multiple tunnels. In Zscaler documentation and engineering training, each GRE tunnel is typically sized for up to about 1 Gbps of throughput. For a 2 Gbps requirement, customers are advised to deploy at least two primary GRE tunnels, with two additional backup tunnels for redundancy and failover.
These tunnels should terminate on border routers that own public IP addresses, ensuring optimal routing and simplifying troubleshooting. Zscaler specifically recommends that the public source IPs used for GRE must not be translated by NAT, because the Zscaler cloud must see the original, registered public IP to associate tunnels with the correct organization and enforce policy. Enabling NAT on GRE traffic can break tunnel establishment and lead to asymmetric or unpredictable routing.
Using internal routers introduces extra hops and complexity and often requires NAT or policy-based routing, which goes against recommended best practices. Similarly, any architecture with NAT enabled on GRE traffic conflicts with Zscaler's published requirements. Therefore, the ideal and recommended design for 2 Gbps via GRE is two primary and two backup GRE tunnels from border routers with NAT disabled.

NEW QUESTION # 40
What is Zscaler's peering policy?

• A. Zscaler has no defined policy and will evaluate requests individually.
• B. Zscaler refuses new peering requests and is happy with the current connectivity.
• C. Zscaler has a restricted peering policy (Zscaler will peer with a limited list of providers).
• D. Zscaler has an open peering policy (Zscaler will peer with any content or service provider).

Answer: D

Explanation:
Zscaler positions global peering as a core part of delivering low-latency, high-performance access to SaaS and internet destinations. In Zscaler architecture and Microsoft 365 best-practices material, Zscaler explicitly states that it operates an open peering policy, meaning it is willing to peer with any content or service provider that meets standard technical requirements.
Training content used for ZDTE further emphasizes that Zscaler peers broadly with major ISPs, cloud providers, and internet exchanges to minimize hops and improve user experience. Flashcard material summarizing the architecture notes directly that Zscaler's peering stance is an "open peering policy," allowing anyone to request connectivity into the Zero Trust Exchange.
Options suggesting Zscaler refuses new peers, restricts to a small list, or has no defined policy contradict this documented approach and would undermine its ability to optimize traffic paths globally. Because the official guidance clearly describes peering as open and inclusive of any qualified provider, the correct choice is that Zscaler has an open peering policy and will peer with any content or service provider.

NEW QUESTION # 41
......

ZDTE  PDF 100% Cover Real Exam Questions: https://passguide.braindumpsit.com/ZDTE-latest-dumps.html