Updated Feb-2023 Pass NS0-516 Exam - Real Practice Test Questions
Download Free Network Appliance NS0-516 Real Exam Questions
NetApp NS0-516 Exam Certification Details:
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Exam Registration | PEARSON VUE |
| Number of Questions | 60 |
| Sample Questions | NetApp NS0-516 Sample Questions |
| Exam Price | $150 USD |
| Exam Name | Implementation Engineer SAN Specialist E-Series |
| Duration | 90 minutes |
NEW QUESTION 30
To enable one-way authentication in a new iSCSI Linux implementation, which three modifications should you make in the /etc/iscsi/iscsid.conf file on the Linux host? (Choose three.)
- A. the target username and password
- B. the initiator username and password
- C. sendtargets discovery
- D. CHAP
- E. iSCSI
Answer: A,C,D
NEW QUESTION 31
Click the Exhibit button.
Referring to the exhibit, what is the total number of ALUA paths from the host to a volume on the EF280?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 32
Which interface launches the script engine for a storage system? (Choose the best answer.)
- A. EMW
- B. DDP
- C. MPIO
- D. AMW
- E. ALUA
Answer: A
NEW QUESTION 33
What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two.)
- A. Change the Feature Pack in the SANtricity System Manager
- B. Change the QSFP type in the HIC
- C. Set in the Hardware tab using SANtricity System Manager
- D. Set at the factory, based on the order
Answer: A,C
NEW QUESTION 34
Which command on a NetApp storage controller will display the average service time on a FC target port basis every five seconds?
- A. lun stats -i 5
- B. fcp stats -i 5
- C. sysstat -f 5
- D. sysstat -i 5
Answer: B
NEW QUESTION 35
Exhibit:
Referring to the exhibit, a customer needs to verify the power draw for the uninterruptible power supply (UPS) that is supporting ten E2824 shelves in a cabinet connected to a 100/110 volts power source.
What is the power draw in amps for the UPS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 36
Which SANtricity installation package contains the graphical user interface that configures a storage system?
- A. SMclient
- B. SMagent
- C. SMutils
- D. SMcli
Answer: A
NEW QUESTION 37
Exhibit:
Referring to the exhibit, which cable is an InfiniBand 4X connector?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 38
Which three documents should be provided to the customer after the E-Series installation is complete?
(Choose three.)
- A. a document with IMT pages that show the supported host configuration and fabric switches in the solution
- B. a document showing user IDs and passwords for all deployed devices
- C. a document showing how much space is available for system expansion
- D. a document showing the cabinet layout with cabling information and IP addresses being used
- E. a document showing available power on the UPS with no equipment connected
Answer: B,D,E
NEW QUESTION 39
If an FDE disk fails, which characteristic is required of the replacement disk?
- A. Must be of a greater capacity
- B. Must be FDE capable
- C. Must be loaded with DACstore
- D. Must be T10-P1 capable
Answer: B
NEW QUESTION 40
What mechanism governs control of the E-Series storage premium features? (Choose the best answer.)
- A. special USB flash drive that must be inserted into the controllers
- B. key file obtained from vendor and passed to system via SANtricity
- C. simple password system
- D. online database requiring the controllers to access the internet to activate features
- E. small toggle switches on the controller boards inside the system
Answer: B
NEW QUESTION 41
When data is written to a snapshot, volume is stored __________. (Choose the best answer.)
- A. on a hot spare drive
- B. on the base volume for that snapshot
- C. on the common repository for the snapshot group
- D. on the repository area associated with the snapshot's corresponding image
- E. on the repository associated with the snapshot volume
Answer: C
NEW QUESTION 42
Which component of an E-Series storage system should always be upgraded first? (Choose the best answer.)
- A. SANtricity management client
- B. Controller NVSRAM
- C. ESM firmware
- D. Controller firmware
Answer: D
NEW QUESTION 43
In-band communication occurs between which entities?
- A. One of the data I/O hosts and the controllers
- B. The management host and the Ethernet management ports
- C. One of the data I/O host's Ethernet port 1 and the expansion shelves
- D. The ESM and the I/O host
Answer: A
NEW QUESTION 44
When you replace a component, why should you wait for the action to register in the storage manager?
- A. To ensure that the host OS completes SOD processing
- B. To ensure that the controller configuration database has a record of the change
- C. To ensure that the administrator has time to complete ESD procedures
- D. To ensure that the storage manager completes the component repair sleep cycle
Answer: B
NEW QUESTION 45
A company wants the most scalable host-side connection topology for E-Series systems. In this scenario, which FC topology would satisfy the requirement?
- A. private loop
- B. fabric attach
- C. direct connect
- D. arbitrated loop
Answer: B
NEW QUESTION 46
Exhibit:
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log? (Choose three.)
- A. Swap out the FC cable
- B. Move the connection to another controller port
- C. Swap out the HBA on the FC switch
- D. Swap out the SFP in the controller port
- E. Reinitialize the FC switch
Answer: A,D,E
NEW QUESTION 47
Storage system volumes can be built upon what two types of logical structures? (Choose the best answer.)
- A. Volume Groups and Disk Pools
- B. Virtual Disks and Disk Pools
- C. Volume Groups and Virtual Disks
- D. Volume Pools and Virtual Disks
- E. Volume Pools and Volume Groups
Answer: A
NEW QUESTION 48
Which scenario is allowed for mirroring between sites?
- A. FDE disabled on the primary volume and enabled on the secondary volume
- B. Data Assurance disabled on the primary volume and enabled on the secondary volume
- C. Data Assurance enabled on the primary volume and enabled on the secondary volume
- D. FDE enabled on the primary volume and disabled on the secondary volume
Answer: C
NEW QUESTION 49
......
NS0-516 Dumps 100 Pass Guarantee With Latest Demo: https://passguide.braindumpsit.com/NS0-516-latest-dumps.html