VMware 2V0-41.24 Exam Prep Guide: Prep guide for the 2V0-41.24 Exam
2025 New Preparation Guide of VMware 2V0-41.24 Exam
VMware 2V0-41.24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 38
Which two choices are use cases for Distributed Intrusion Detection? (Choose two.)
- A. Gain Insight about micro-segmentation traffic flows.
- B. Quarantine workloads based on vulnerabilities.
- C. Use agentless antivirus with Guest Introspection.
- D. Identify security vulnerabilities in the workloads.
- E. Identify risk and reputation of accessed websites.
Answer: B,D
Explanation:
Quarantine workloads based on vulnerabilities: You can use Distributed Intrusion Detection to detect vulnerabilities in your workloads and apply quarantine actions to isolate them from the network until they are remediated.
Identify security vulnerabilities in the workloads: You can use Distributed Intrusion Detection to scan your workloads for known vulnerabilities and generate reports that show the severity, impact, and remediation steps for each vulnerability.
NEW QUESTION # 39
Where in the NSX UI would an administrator set the time attribute for a time-based Gateway Firewall rule?
- A. There is no option in the NSX UI. It must be done via command line interface.
- B. The option to set time-based rule is a clock Icon in the policy.
- C. The option to set time based rule is a field in the rule Itself.
- D. The option to set time-based rule is a clock Icon in the rule.
Answer: B
Explanation:
The clock icon appears on the firewall policy section that you want to have a time window. By clicking the clock icon, you can create or select a time window that applies to all the rules in that policy section.
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-8572496E-A60E-48C3-A016-4A081AC80BE7.html
NEW QUESTION # 40
Which TraceFlow traffic type should an NSX administrator use for validating connectivity between App and DB virtual machines that reside on different segments?
- A. Broadcast
- B. Unicast
- C. Multicast
- D. Anycast
Answer: B
Explanation:
In NSX, Unicast traffic type should be used in TraceFlow when validating connectivity between two specific virtual machines, such as App and DB VMs, that reside on different segments.
Unicast traffic is directed from one source to a single destination, making it suitable for testing direct connectivity between two VMs.
NEW QUESTION # 41
Which of the two following characteristics about NAT64 are true? (Choose two.)
- A. NAT64 is supported on Tier-1 gateways only.
- B. NAT64 is stateless and requires gateways to be deployed in active-standby mode.
- C. NAT64 requires the Tier-1 gateway to be configured in active-active mode.
- D. NAT64 is supported on Tier-0 and Tier-1 gateways.
- E. NAT64 requires the Tier-1 gateway to be configured in active-standby mode.
Answer: D,E
Explanation:
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-69604E49-BC8B-4777-BFD8- B98F8D1FF064.html
NEW QUESTION # 42
HOTSPOT
Refer to the exhibit.
An administrator configured NSX Advanced Load Balancer to load balance the production web server traffic, but the end users are unable to access the production website by using the VIP address.
Which of the following Tier-1 gateway route advertisement settings needs to be enabled to resolve the problem? Mark the correct answer by clicking on the image.
Answer:
Explanation:
Explanation:
The correct answer is to enable the option All LB VIP Routes on the Tier-1 gateway route advertisement settings. This option allows the Tier-1 gateway to advertise the NSX Advanced Load Balancer LB VIP routes to the Tier-0 gateway and other peer routers, so that the end users can reach the production website by using the VIP address1. The other options are not relevant for this scenario.
To mark the correct answer by clicking on the image, you can click on the toggle switch next to All LB VIP Routes to turn it on. The switch should change from gray to blue, indicating that the option is enabled.
See the image below for reference:
NEW QUESTION # 43
Refer to the exhibits.
Drag and drop the NSX graphic element icons on the left found in an NSX Intelligence visualization graph to Its correct description on the right.
Answer:
Explanation:
NEW QUESTION # 44
Which two statements are true for IPSec VPN? (Choose two.)
- A. VPNs can be configured on the command line Interface on the NSX manager.
- B. IPSec VPN services can be configured at Tler-0 and Tler-1 gateways.
- C. IPSec VPNs use the DPDK accelerated performance library.
- D. Dynamic routing Is supported for any IPSec mode In NSX.
Answer: B,C
Explanation:
According to the VMware NSX 4.x Professional documents and tutorials, IPSec VPN secures traffic flowing between two networks connected over a public network through IPSec gateways called endpoints. NSX Edge supports a policy-based or a route-based IPSec VPN. Beginning with NSX-T Data Center 2.5, IPSec VPN services are supported on both Tier-0 and Tier-1 gateways1. NSX Edge also leverages the DPDK accelerated performance library to optimize the performance of IPSec VPN2.
https://docs.vmware.com/en/VMware-NSX/4.0/administration/GUID-7D9F7199-E51B-478B-A8BC-
58AD5BBAA0F6.html
NEW QUESTION # 45
Which CLI command is used for packet capture on the ESXi Node?
- A. debug
- B. pktcap-uw
- C. set capture
- D. tcpdump
Answer: B
Explanation:
The pktcap-uw command is specifically used on ESXi hosts for packet capture. It provides a detailed packet capture utility that allows administrators to capture traffic at various points on the ESXi host, such as virtual switches, uplinks, and VMkernel interfaces, making it a powerful tool for network troubleshooting on ESXi nodes.
NEW QUESTION # 46
Which two of the following will be used for ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)
- A. Downlink Interface for the Tier-1 DR
- B. Tier-0 Uplink interface
- C. Inter-Tier interface on the Tier-0 gateway
- D. Downlink Interface for the Tier-0 DR
- E. Tier-1 SR Router Port
Answer: B,D
Explanation:
In a Single Tier topology, the Edge node utilizes the following interfaces for ingress traffic:
Tier-0 Uplink Interface: This interface connects the Edge node to external networks, handling north-south traffic.
Downlink Interface for the Tier-0 Distributed Router (DR): This interface connects the Edge node to internal segments, managing east-west traffic between virtual machines.
NEW QUESTION # 47
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI Is inaccessible?
- A. get support-bundle file vcpnv.tgz
- B. vm-support
- C. esxcli system syslog config logger set - -id=nsxmanager
- D. set support-bundle file vcpnv.tgz
Answer: A
Explanation:
To generate the support bundle logs on the NSX Manager via API, the NSX administrator needs to use the POST method with the URL https://nsxmgr_ip/api/1.0/appliance-management/techsupportlogs/NSX, where nsxmgr_ip is the IP address of the NSX Manager1. This will create a tech support bundle file with a name like vcpnv.tgz. To download the generated tech support bundle file via CLI, the NSX administrator needs to use the get support-bundle file vcpnv.tgz command on the NSX Manager1. The other commands are incorrect because they either do not generate or download the support bundle logs, or they are not related to the NSX Manager.
NEW QUESTION # 48
Which table on an ESXi host is used to determine the location of a particular workload for a frame-forwarding decision?
- A. Routing Table
- B. ARP Table
- C. TEP Table
- D. MAC Table
Answer: D
Explanation:
The MAC Table on an ESXi host is used to determine the location of a particular workload for frame-forwarding decisions. This table maps MAC addresses to specific interfaces, enabling the ESXi host to forward frames to the correct destination based on the MAC address of the workload. This is crucial for efficient Layer 2 forwarding decisions within the host.
NEW QUESTION # 49
A customer is preparing to deploy a VMware Kubernetes solution in an NSX environment.
What is the minimum MTU size for the UPLINK profile?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
The minimum MTU size for the UPLINK profile is 1700 bytes. This is because the UPLINK profile is used to configure the physical NICs that connect to the NSX-T overlay network. The overlay network uses geneve encapsulation, which adds an overhead of 54 bytes to the original packet. Therefore, to support a standard MTU of 1500 bytes for the inner packet, the outer packet must have an MTU of at least 1554 bytes. However, VMware recommends adding an extra buffer of 146 bytes to account for possible additional headers or VLAN tags. Therefore, the minimum MTU size for the UPLINK profile is 1700 bytes (1554 + 146).
Reference: : VMware NSX-T Data Center Installation Guide, page 23. :
VMware NSX-T Data Center Administration Guide, page 102. : VMware NSX-T Data Center Installation Guide, page 24.
https://nsx.techzone.vmware.com/resource/nsx-reference-design-guide#a-31-the-nsx-virtual-switch
NEW QUESTION # 50
Which tool could be used to configure BGP on a Tier-0 Gateway?
- A. ESX CLI
- B. iPerf3
- C. API
- D. NSX CLI
Answer: C
Explanation:
API: BGP (Border Gateway Protocol) on a Tier-0 Gateway in NSX can be configured using the NSX API, which provides programmatic access to configure and manage various features, including BGP settings.
NEW QUESTION # 51
In which VPN type are the Virtual Tunnel interfaces (VTI) used?
- A. Route & SSL based VPNs
- B. Route-based VPN
- C. Policy & Route based VPNs
- D. SSL-based VPN
Answer: B
Explanation:
Virtual Tunnel Interfaces (VTI) are used in route-based VPNs. In this type of VPN, the tunnel is treated like a regular interface on the router. This allows for the configuration of routing protocols and the application of routing decisions to the traffic flowing through the VPN tunnel. VTIs simplify the management of routing and make it more flexible in VPN scenarios.
NEW QUESTION # 52
Which three solutions does the software-defined data center (SDDC) help build? (Choose three.)
- A. Secure cloud
- B. Native cloud
- C. Public cloud
- D. Hyperscale
- E. Hybrid cloud
- F. On premises
Answer: C,E,F
NEW QUESTION # 53
What is the VMware recommended way to deploy a virtual NSX Edge Node?
- A. Through the vSphere Web Client
- B. Through the OVF command line tool
- C. Through automated or interactive mode using an ISO
- D. Through the NSX Ul
Answer: D
Explanation:
Install NSX Edge on an ESXi host using NSX Manager UI (recommended method), vSphere Web Client (from UI or vSphere command-line OVF tool) or as physical severs.
https://docs.vmware.com/en/VMware-NSX/4.1/installation/GUID-E9A01C68-93E7-4140-B306-
19CD6806199F.html
NEW QUESTION # 54
A customer has experienced a disaster. Which statement describes a recovery benefit of a vSphere Environment with NSX Data Center?
- A. It is a requirement to stretch cluster to have a DR scenario.
- B. Workload mobility is tied to vCenter server.
- C. NSX Datacenter enables replication between sites.
- D. It simplifies the DR by not requiring the change of the IP addresses of workloads.
Answer: D
NEW QUESTION # 55
Which three of the following describe the Border Gateway Routing Protocol (BGP) configuration on a Tier-0 Gateway? (Choose three.)
- A. It supports a 4-byte autonomous system number.
- B. Can be used as an Exterior Gateway Protocol.
- C. EIGRP Is disabled by default.
- D. BGP is enabled by default.
- E. The network is divided into areas that are logical groups.
Answer: A,B,C
Explanation:
A) Can be used as an Exterior Gateway Protocol. This is correct. BGP is a protocol that can be used to exchange routing information between different autonomous systems (AS). An AS is a network or a group of networks under a single administrative control. BGP can be used as an Exterior Gateway Protocol (EGP) to connect an AS to other ASes on the internet or other external networks1 B) It supports a 4-byte autonomous system number. This is correct. BGP supports both 2-byte and 4- byte AS numbers. A 2-byte AS number can range from 1 to 65535, while a 4-byte AS number can range from 65536 to 4294967295. NSX supports both 2-byte and 4-byte AS numbers for BGP configuration on a Tier-0 Gateway2 C) The network is divided into areas that are logical groups. This is incorrect. This statement describes OSPF, not BGP. OSPF is another routing protocol that operates within a single AS and divides the network into areas to reduce routing overhead and improve scalability. BGP does not use the concept of areas, but rather uses attributes, policies, and filters to control the routing decisions and traffic flow3 D) FIGRP Is disabled by default. This is correct. FIGRP stands for Fast Interior Gateway Routing Protocol, which is an enhanced version of IGRP, an obsolete routing protocol developed by Cisco.
FIGRP is not supported by NSX and is disabled by default on a Tier-0 Gateway.
E) BGP is enabled by default. This is incorrect. BGP is not enabled by default on a Tier-0 Gateway. To enable BGP, you need to configure the local AS number and the BGP neighbors on the Tier-0 Gateway using the NSX Manager UI or API.
To learn more about BGP configuration on a Tier-0 Gateway in NSX, you can refer to the following resources:
VMware NSX Documentation: Configure BGP 1
VMware NSX 4.x Professional: BGP Configuration
VMware NSX 4.x Professional: BGP Troubleshooting
NEW QUESTION # 56
Which is an advantage of an L2 VPN in an NSX 4.x environment?
- A. Achieve better performance
- B. Enables Multi-Cloud solutions
- C. Use the same broadcast domain
- D. Enables VM mobility with re-IP
Answer: C
Explanation:
An L2 VPN (Layer 2 VPN) in an NSX 4.x environment allows you to extend a Layer 2 network across different sites or data centers. This enables the connected environments to share the same broadcast domain, meaning that broadcast traffic can be transmitted between sites as if they were on the same local network. This is particularly useful for scenarios where you need to maintain Layer 2 connectivity across geographically dispersed locations.
NEW QUESTION # 57
When a stateful service is enabled for the first lime on a Tier-0 Gateway, what happens on the NSX Edge node'
- A. SR is instantiated and automatically connected with DR.
- B. SR and DR Is instantiated but requites manual connection.
- C. SR and DR doesn't need to be connected to provide any stateful services.
- D. DR Is instantiated and automatically connected with SR.
Answer: A
Explanation:
The answer is
A: SR is instantiated and automatically connected with DR.
SR stands for Service Router and DR stands for Distributed Router. They are components of the NSX Edge node that provide different functions1 The SR is responsible for providing stateful services such as NAT, firewall, load balancing, VPN, and DHCP. The DR is responsible for providing distributed routing and switching between logical segments and the physical network1 When a stateful service is enabled for the first time on a Tier-0 Gateway, the NSX Edge node automatically creates an SR instance and connects it with the existing DR instance. This allows the stateful service to be applied to the traffic that passes through the SR before reaching the DR2 According to the VMware NSX 4.x Professional Exam Guide, understanding the SR and DR components and their functions is one of the exam objectives3 To learn more about the SR and DR components and how they work on the NSX Edge node, you can refer to the following resources:
VMware NSX Documentation: NSX Edge Components 1
VMware NSX 4.x Professional: NSX Edge Architecture
VMware NSX 4.x Professional: NSX Edge Routing
NEW QUESTION # 58
Which command Is used to test management connectivity from a transport node to NSX Manager?
- A. esxcli network connection list | grep 1235
- B. esxcli network ip connection list | grep 1235
- C. esxcli network ip connection list | grep 1234
- D. esxcli network connection list | grep 1234
Answer: C
Explanation:
Management Plane Appliance Proxy Hub (MP APH) to host connectivity - TCP:1234 Central Control Plane (CCP) to host (NSX-Proxy) connectivity - TCP: 1235 esxcli network ip connection list | grep 1234 is the correct answer.
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-7F899902-6884-40D0-B0AF- DF713AB052BD.html?hWord=N4IghgNiBcIHYGcAeACADgewE4BcUEYAmAZgBYQBfIA
NEW QUESTION # 59
How does the Traceflow tool identify issues in a network?
- A. Compares the management plane configuration states containing control plane traffic and error reporting from transport node agents.
- B. Injects synthetic traffic into the data plane and observes the results in the control plane.
- C. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
- D. Injects ICMP traffic into the data plane and observes the results in the control plane.
Answer: B
Explanation:
The Traceflow tool identifies issues in a network by injecting synthetic traffic into the data plane and observing the results in the control plane. This allows the tool to identify any issues in the network and provide a detailed report on the problem. You can use the Traceflow tool to test connectivity between any two endpoints in your NSX-T Data Center environment.
NEW QUESTION # 60
Which three security features are dependent on the NSX Application Platform? (Choose three.)
- A. NSX Firewall
- B. NSX Distributed IDS/IPS
- C. NSX TLS Inspection
- D. NSX Malware Prevention
- E. NSX Network Detection and Response
- F. NSX Intelligence
Answer: D,E,F
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/nsx-application-platform/GUID-42EDE0AD-CD65-41AC-9694-AD0CCEC35969.html
NEW QUESTION # 61
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Switch Visualization
- B. Activity Monitoring
- C. IPF1X
- D. Port Mirroring
Answer: A
Explanation:
Switch Visualization in the NSX UI provides a clear mapping between virtual NICs (vNICs) and the physical adapters on the host. This feature allows administrators to see how virtual network interfaces connect to the underlying physical network infrastructure, which is essential for troubleshooting connectivity issues on transport nodes.
NEW QUESTION # 62
......
Latest Questions 2V0-41.24 Guide to Prepare Free Practice Tests: https://passguide.braindumpsit.com/2V0-41.24-latest-dumps.html